ADVERTISEMENT
Introduction
Rising damp can wreak havoc on your walls, causing unsightly damage and compromising your home’s structure. Fortunately, you don’t need to hire expensive professionals to fix it. With a straightforward DIY method, you can eliminate rising damp once and for all—saving money and ensuring a long-lasting solution. In this guide, we’ll walk you through an easy, affordable approach to banishing rising damp and protecting your walls for the future.
Ingredients
To address rising damp, you’ll need the following materials:
Masonry Water Repellent – A breathable solution designed for porous walls.
Injection Cream for Damp Proofing – A specialized cream that forms a damp-proof barrier.
Cleaning Supplies – Brushes, scrapers, and warm soapy water for surface preparation.
Sealant or Plaster – To finish and protect the repaired wall.
Protective Gear – Gloves, goggles, and a dust mask.
Directions
Prepare the Wall:
Remove any peeling paint or damaged plaster.
Clean the surface thoroughly using a brush and soapy water to eliminate dirt and salt deposits.
Drill Injection Holes:
Use a drill to create small, evenly spaced holes (approximately 10-12 cm apart) along the base of the affected wall. Ensure these holes are at least 15 cm above ground level.
Apply the Injection Cream:
Insert the damp-proof injection cream into each drilled hole using a specialized applicator or caulking gun. This forms a horizontal barrier to block moisture.
Seal and Protect:
Allow the cream to set for 24-48 hours.
Re-plaster and repaint the wall using breathable materials to finish the repair.
Waterproof the Wall:
Apply masonry water repellent to the exterior of the wall to prevent future moisture penetration.
Serving and Storage Tips
Serving Your Home: Regularly inspect the repaired walls to ensure they remain dry and free from further damage.
Storage of Materials: Keep leftover damp-proof cream and sealants in cool, dry places for future touch-ups.
Variations
ADVERTISEMENT
