ADVERTISEMENT
Introduction
A door that won’t stay closed can be frustrating, whether it’s an interior door that keeps swinging open or an exterior door that won’t latch properly. One of the most effective solutions is installing a spring into the door hinge. This simple yet effective fix ensures the door remains closed without requiring a door stopper or latch adjustment. In this guide, we’ll walk you through the process of inserting a spring into a door hinge step by step.
Ingredients (Tools & Materials Needed)
Spring-loaded hinge (or separate hinge spring)
Screwdriver (Phillips or flathead, depending on screws)
Allen wrench (if required for the hinge type)
Pliers (optional, for better grip)
Safety gloves (recommended to prevent injuries)
Directions
Step 1: Remove the Hinge Pin
Close the door and have someone hold it steady.
Locate the hinge where you want to install the spring.
Insert a flathead screwdriver under the hinge pin’s base and tap it with a hammer to loosen it.
Once loose, pull the hinge pin out completely.
Step 2: Insert the Spring Mechanism
If you’re using a spring-loaded hinge, align it with the existing hinge placement.
If you have a separate hinge spring, wrap it around the hinge barrel according to the manufacturer’s instructions.
Ensure the spring is in the correct position so that it provides tension when the door swings.
Step 3: Reinsert the Hinge Pin
Carefully insert the hinge pin back through the hinge, securing the spring in place.
If the spring has tension holes, use an Allen wrench to tighten the spring to the desired strength.
Test the door’s movement, ensuring it closes smoothly without slamming too hard.
Step 4: Make Final Adjustments
If the door is closing too fast or too slow, adjust the tension using the Allen wrench or pliers.
Test the door multiple times to confirm the spring holds the door securely closed.
Serving and Storage Tips (Maintenance Tips)
Regularly check the hinge and spring tension to prevent wear.
Apply lubricant to the hinge every few months for smooth operation.
If the door starts to sag, tighten any loose screws in the hinge.
Variations
ADVERTISEMENT
